Free circuit diagrams

Bookmark and Share
privacy policy

Live-line Detector

Detects the presence of a live mains conductor
Minimum parts counting

Circuit diagram

C1 100nF 63V Polyester or Ceramic Capacitor
D1 Red LED (any type)
IC1 4017 Decade counter with 10 decoded outputs IC
P1 SPST Pushbutton
B1 3V Battery (two 1.5V AA or AAA cells in series etc.)
Sensing probe__3 to 15 cm. long, stiff insulated piece of wire

Circuit operation:
If the unit is brought close to a live conductor (insulated, and even buried in plaster) capacitive coupling between the live conductor and the probe clocks the counter, and causes the LED to flash 5 times per second, because the 4017 IC divides the mains 50Hz frequency by 10.
When remote from a live line, the unit stops counting, the LED resulting permanently off.

Sensitivity can be varied using a more or less long sensing probe.
Due to 3V operation, the LED's current limiting resistor can be omitted.

author:RED Free Circuit Designs,

Link to this page for forums and blogs:
All content on this site is provided as is and without any guarantee on any kind, implied or otherwise. We cannot be held responsible for any errors, omissions, or damages arising out of use of information available on this web site. The content in this site may contain COPYRIGHTED information and should not be reproduced in any way without prior permission from the authors. Be aware! Electricity can kill! © 2008.
page generated in :0.0248