Free circuit diagrams

Bookmark and Share
privacy policy

EPROM adapter for ATMEL 89 Series Flash Microcontroller Programmer Ver 2.0

The EEprom programmer software supports the following devices.
28C16 28C256 28C17 29C256 28C64

Diode D1 and resistor R1 provide the VDD isolation when programming the 24 pin devices. The jumper J3 must be shorted for 24 pin devices, and open circuit for 28 pin device programming. Following EEPROMs are pin compatible with their EPROMs version,
28C16 ---> 2716
28C64 ---> 2764
29C256 ---> 27256
The software for this adapter is located here:

Circuit diagram


Parts Placement

author:Kyriakos Kontakos,

Link to this page for forums and blogs:
All content on this site is provided as is and without any guarantee on any kind, implied or otherwise. We cannot be held responsible for any errors, omissions, or damages arising out of use of information available on this web site. The content in this site may contain COPYRIGHTED information and should not be reproduced in any way without prior permission from the authors. Be aware! Electricity can kill! © 2008.
page generated in :0.0333